Start-up & commissioning for metering control systems

On-site support by dedicated KROHNE engineers

  • Installation supervision for on- and offshore metering control systems
  • Complete commissioning services to assure smooth operation in the field
  • Site acceptance testing (SAT) to verify the system is working as per end-user requirements

Start-up & commissioning for metering control systems

On-site support by dedicated KROHNE engineers

  • Installation supervision for on- and offshore metering control systems
  • Complete commissioning services to assure smooth operation in the field
  • Site acceptance testing (SAT) to verify the system is working as per end-user requirements

Overview

Metering control systems from KROHNE usually allow plug-and-play operation. Wiring, configuration and testing is done prior to shipment to minimise installation time and risk. KROHNE engineers are available to supervise the installation, start-up and commissioning, both on- or offshore.

Our systems engineers have also completed the training programs for the integration of third-party components, such as PLCs and barriers. Where expert service is required on such third-party products, KROHNE will liaise directly with the manufacturer enabling all services to be conducted under KROHNE co-ordination and responsibility.

  • Kick-off meeting prior to installation
  • Inspection and testing of communication from the field to the control room and ERP system
  • Support by experienced engineers with offshore certification where required
  • Expert service for the implementation of third-party components, fully co-ordinated by KROHNE
  • Cooperation and communication with local metrology institutes during commissioning phase, to meet local custody transfer requirements
  • Trainings and workshops for operators, engineers and maintenance staff
Related solutions
0 / 0
Supervisory Control Cabinets
Complete solution for process control
  • Provides control of the metering system, including validation of field instrumentation
  • Installed in a safe area, typically in a control room or dedicated building
  • Supplied in combination with new metering systems, or for an upgrade to existing systems
Modular flow control and data transfer cabinets
Basic flow control solution
  • Cost effective, modular metering control solution
  • Based on the SUMMIT 8800 flow computer
  • Installed in a safe area, typically in a control room
Flow computing
Flow computer solution for the visualisation of measurements
  • Graphical representation of all measurements
  • Fully pre-configured and tested according to customer requirements
  • Different liquid and gas streams measured and displayed on a single flow computer
Metering houses and shelters
Turnkey housing solution for the installation of electronic systems and cabinets on-site
  • A safe area for the installation of electronic equipment and cabinets
  • Integrated HVAC system where required
  • Local operator supervisory work station can be included
Related services
0 / 0
Consultancy & engineering for metering control systems
Execution of new installations or upgrades and retrofits of existing systems
  • Cost effective engineering concepts tailored to the application and installation
  • From single flow computer to fully wired and pre-configured metering houses
  • Detailed design of instrumentation plus engineering & integration
  • Site survey and feasibility studies for specific process or technical requirements
System calibration & validation for metering control systems
KROHNE certified validation with full audit trail
  • Additional diagnostics and monitoring to achieve full performance of the system
  • Verification of the correct firmware and software versions and parameter settings
  • Alarm and error log review
  • Periodical inspection, including environmental and metrological certification
Operation & maintenance for metering control systems
Operational support and scheduled maintenance
  • Maintenance contracts and service level agreements with guaranteed response and mobilisation times
  • Pre-defined service rates and response times
  • 24/7 Customer support and emergency helpdesk
  • Periodical health checks and software updates
  • Troubleshooting using a remote link or by an engineer on-site
Training for metering control systems
Workshops and seminars for operators, engineers and maintenance staff
  • Basic principles of metering control systems
  • Customised to suit the specific requirements of the operator and the application
  • Training at one of our training locations or at client premises
Email
Contact